Five Zone RF Wireless LED Dimmer SR-2801 with SR-2501N series

• Reliable stable switch and dimming control function,control range≥20M.
  Battery in the remote is with long life span. It normally can use for 2 years.
  Dimming range 0.1-100%.
  Model:SR-2801 with SR-2501N series
  Use with power repeater to expand the output power unlimitedly.
  Enable to control 5 zones separately, each zone can be set endless receivers,

  each receiver maximally be controlled by 8 different remotes.
  
  

• Enable be dimmed and ON/OFF by push button after connecting receivers.

• Receivers can work with RF-WIFI converter after installing software on IOS and
  Android system.

• Push dim function

The SR-2801 and its receiver is a 5 Zone RF Wireless LED Dimmer. It lets you individually control up to five
different zones independently or in a group.

    Five Zone RF Wireless LED Dimmer

  Five Zone RF Wireless LED Dimmer

After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
2. If you use multiple receivers, you have 2 choices:
Have all receivers in the same zone like Zone 1 for example or
Have each receiver in a different zone, like Zone 1, 2, 3 and so on
3. In order for each receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to
use: short press the Learning Key on the receiver, then immediately short press the or from the zone
you wish to use (for example ON/Off from zone 1). Once you do that, the LED lights will blink once. Now your
remote and receiver are paired!
4. Do the same for the other receivers if you use them.
This wireless receiver can work in any of the 5 zones. It has a special “Learning Key” that is in the unit that will
enable you to pair it to any of the 5 zones in the wireless remote control. You can add as many optional
receivers as you wish, to create up to 5 different control zones. Each zone can have an endless number of
receivers, which will let you escalate any installation from small to super-size.
Memory Reset:
In case you want to reset the memory of the receiver, press the learning function button for 10 seconds while
the unit is being powered. The unit will then reset to factory defaults.

After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
2. If you use multiple receivers, you have 2 choices:
Have all receivers in the same zone like Zone 1 for example or
Have each receiver in a different zone, like Zone 1, 2, 3 and so on
3. In order for each receiver to know what Zone it belongs to, you will need to “pair” it to the zone you wish to
use: short press the Learning Key on the receiver, then immediately short press the or from the zone
you wish to use (for example ON/Off from zone 1). Once you do that, the LED lights will blink once. Now your
remote and receiver are paired!
4. Do the same for the other receivers if you use them.
This wireless receiver can work in any of the 5 zones. It has a special “Learning Key” that is in the unit that will
enable you to pair it to any of the 5 zones in the wireless remote control. You can add as many optional
receivers as you wish, to create up to 5 different control zones. Each zone can have an endless number of
receivers, which will let you escalate any installation from small to super-size.
Memory Reset:
In case you want to reset the memory of the receiver, press the learning function button for 10 seconds while
the unit is being powered. The unit will then reset to factory defaults.